Needing some semi-n00b help

Irc, Eggdrop, BNC problems and discusion.

Moderator: Moderators

Needing some semi-n00b help

Postby gamerD00d » Thu Mar 17, 2005 4:40 pm

OK, I'm slightly new to this gateway stuff.
I've done some reading, but I think I'm at a stuck point - here's my whole situation::

At my workplace, they have a proxy that blocks most high ports, such as IRC's default 6667-???? range..
I'm allowed to install any freeware I need to do my job, and IRC (I feel) is one of those. NO ILLEGAL ACTIVITY or ABUSE is going to take place from me. Primarially I'd like to get onto FreeNode and talk to my fellow Gentoo Linux user friends when I have down time (which is a lot). BTW, I've recieved authorization from my regional director to do this - so please keep the flaming down to NONE.
I might also want to set up an internal IRC server for the help desk.

So here's where I'm at now -- I can't connect to irc.polarhome.com:8080 like it says on the ports list, but I CAN connect on port 8000 to the proxy.
When I connect, it says IRC didn't give a password, and to use /QUOTE PASS yourpassword:
* Connecting to irc.polarhome.com (8000)
-Welcome- psyBNC2.2.2
--psyBNC- Your IRC Client did not support a password. Please type /QUOTE PASS yourpassword to connect.
-> Server: PASS (masked)
--psyBNC- Wrong Password. Disconnecting.
* Disconnected


Can someone AIM me and help me figure this stuff out?? I'm on AIM all day (they let those ports through easily for some reason) - so some live help would be GREAT!! Thanks in advance people!
gamerD00d
Newbie
 
Posts: 1
Joined: Thu Mar 17, 2005 4:19 pm

Postby Matej » Thu Mar 17, 2005 5:34 pm

Seems that the public irc proxy doesn't exist anymore.

http://www.polarhome.com/forum/viewtopic.php?t=831
User avatar
Matej
Forum Admin
Forum Admin
 
Posts: 365
Joined: Sun Sep 29, 2002 12:28 am
Location: Ljubljana, Slovenia

Postby DenisF » Fri Mar 18, 2005 2:49 pm

And that port 8000 is someone's private irc proxy. which is also the reason why polarhome can't connect to QuakeNet and other popular networks that scan for proxy ports.

*sigh*
Image
[ FAQ ] :: [ Policy ] :: [ Port Forwarding Guide ] :: [ Search ]
User avatar
DenisF
Forum Admin
Forum Admin
 
Posts: 679
Joined: Mon Dec 16, 2002 9:09 pm
Location: Israhell

Postby Matej » Fri Mar 18, 2005 6:02 pm

Yeh. I have no idea why Z hasn't done anything about those ports. :?
User avatar
Matej
Forum Admin
Forum Admin
 
Posts: 365
Joined: Sun Sep 29, 2002 12:28 am
Location: Ljubljana, Slovenia

Postby DenisF » Sat Mar 19, 2005 10:00 pm

Probably stuck in the bottom of the TODO list.

i mean. i asked him to block these ports over 9 months ago..
Image
[ FAQ ] :: [ Policy ] :: [ Port Forwarding Guide ] :: [ Search ]
User avatar
DenisF
Forum Admin
Forum Admin
 
Posts: 679
Joined: Mon Dec 16, 2002 9:09 pm
Location: Israhell

Postby zoli » Mon Mar 21, 2005 2:09 am

hi,

yes... it is somewhete on the TODO list...

Please test now... is it better?
Regards,
Z
---
Zoltan Arpadffy
zoli
Forum Admin
Forum Admin
 
Posts: 784
Joined: Mon Sep 30, 2002 1:27 am
Location: Stockholm, Sweden

Postby DenisF » Mon Mar 21, 2005 4:11 pm

Hey,

denisf@redhat~$ telnet port80.se.quakenet.org 6667
Trying 217.75.98.138...
Connected to qnet1.port80.se (217.75.98.138).
Escape character is '^]'.
NOTICE AUTH :*** Looking up your hostname
NOTICE AUTH :*** Checking Ident
NOTICE AUTH :*** Found your hostname
NOTICE AUTH :*** Got ident response
PASS *
NICK DenisF
USER DenisF 8 * :pie
:port80a.se.quakenet.org 465 DenisF :open proxy.
ERROR :Closing Link: DenisF by port80a.se.quakenet.org (G-lined)
Connection closed by foreign host.
denisf@redhat~$


now I took that g-line Id [465] and checked on quakenet's site.
comes up with this;

Open proxy details

GLINE-ID 465

The following open Proxies were found on your IP:
HTTP-Proxy that supports the CONNECT-Command on Port 6588


these are the ports you need to block, Zoli;
80, 1080, 3128, 6588, 8000, 8080 & 45554
Image
[ FAQ ] :: [ Policy ] :: [ Port Forwarding Guide ] :: [ Search ]
User avatar
DenisF
Forum Admin
Forum Admin
 
Posts: 679
Joined: Mon Dec 16, 2002 9:09 pm
Location: Israhell

Postby sjaz » Mon Mar 21, 2005 10:04 pm

Not 80, thats http ;p
User avatar
sjaz
Forum Admin
Forum Admin
 
Posts: 694
Joined: Fri Feb 14, 2003 11:08 pm
Location: London, UK

Postby zoli » Thu Mar 24, 2005 10:56 pm

done...

I added proxy block code years ago to route/forward scripts - but never checked.

There was a syntax error, and it was never executed correctly :(

Now it should be OK.
Sorry for caused inconvenience - it was my fault that all these years polarhome had open proxy ports (that was always asked and named by Denis several times )
Regards,
Z
---
Zoltan Arpadffy
zoli
Forum Admin
Forum Admin
 
Posts: 784
Joined: Mon Sep 30, 2002 1:27 am
Location: Stockholm, Sweden

Postby DenisF » Sat Mar 26, 2005 6:22 pm

∙φ∙ Connecting to port 6667 of server irc.quakenet.org [refnum 93]
[quakenet] *** Looking up your hostname
[quakenet] *** Checking Ident
[quakenet] *** Found your hostname
[quakenet] *** Got ident response
∙φ∙ BitchX: For more information about BitchX type /about
∙φ∙ Welcome to the QuakeNet IRC Network, denisf (from
mediatraffic.fi.quakenet.org)



Weeeeeeeeeee :D :D :D :D :D :D

Thanks zoli!
Image
[ FAQ ] :: [ Policy ] :: [ Port Forwarding Guide ] :: [ Search ]
User avatar
DenisF
Forum Admin
Forum Admin
 
Posts: 679
Joined: Mon Dec 16, 2002 9:09 pm
Location: Israhell

-

Postby Rhyday » Sat Jun 25, 2022 9:23 pm

Hello Rob, I was reading your post hoping to find a place where I could help out also.Im in the Plano area. Someone must be preping to race near here.
Sd67444DFG
Rhyday
Newbie
 
Posts: 4
Joined: Tue Dec 10, 2013 1:59 am


Return to Polarhome IRC

Who is online

Users browsing this forum: No registered users and 1 guest